- N -
NIASE
National Institute of Automotive Service Excellence.
Nichrome
A metallic compound containing nickel and chromium, used in making high resistance filaments.
Nickel
An element, Ni, used in alloys and electroplating.
Nikasil
A trade name of a popular coating applied to the walls of cylinder sleeves to reduce friction and promote sealing at high temperatures.
Nitride
A compound containing electronegative nitrogen and an elecropositive element or metal.
Nitrile
A type of rubber like material that is okay for use with petroleum products.
Nitrile Seal
Seal made by mixing butadiene and acrylonitrile.
Nitro
A short term used for nitromethane.
Nitrogen
A colorless, odorless, tasteless gas that makes up 78% of the atmosphere and is part of all living tissues.
Nitrogen Oxide
Any chemical compound of nitrogen and oxygen (NOx) as a by-product of combustion that forms smog in the presence of sunlight.
Nitromethane
A highly combustible liquid that is the main ingredient in drag-racing fuels.
Nitrous Oxide
A non-flammable, non-explosive gas (N2O) used as an oxidizing agent with gasoline or methanol to increase the rate and efficiency of combustion thereby increasing the horsepower.
Nitrous Oxide Systems (NOS)
A popular manufacturer of nitrous oxide injection systems.
NLGI
An abbreviation for the National Lubricating Grease Institute, Usually associated with grease, The higher the NLGI number, the firmer the grease; #000 is very fluid whereas # 5 is very firm. The consistency most recommended is NLGI #2 (soft).
NLV
Non linear valve.
Nm
Newton meter.
NO
Nitric oxide; Also No, Nobelium An element with the atomic number of 102.
No Good (NG)
Not fit for service.
No-load Test
A starting-motor test to determine the rpm and current draw of a starter motor. The mechanical tachometer is placed on the drive end of the armature shaft and the motor is then connected to a proper power source. An ammeter, attached to the power means, determines current required.
No-tilt Convertible Fifth
A fifth wheel with fore/aft articulation that can be locked out to produce a rigid top plate for applications that have either rigid and/or articulating upper couplers.